Raimondi Leveling System STARTER KIT -100 wedges,100 Regular clips, floor pliers

Description

Raimondi Tile Leveling System Starter Kit
WE ARE AN AUTHORIZED DISTRIBUTOR
*Listing is for 1 Bucket = 100 Wedges, 100 Regular 1/16" Clips, 1 Floor Pliers*
Raimondi Tile Leveling System Starter Kit
Product description
A correct setting requires the perfect leveling of tile to tile. It is hard to properly set flexible and low thickness as well as large sized and heavy tiles because of uneven floor foundation. As a result, tiles which seemed perfectly leveled while installing them, when the adhesive is set, they show differences in level that compromise the final result (like lippages). This problem can be avoided using the leveling spacers which preserve the perfect leveling of the tiles, (no lippages) also, this will speed up the setting of the tiles. This leveling system makes setting easier, faster, and the tiles will be perfectly leveled.
US Item# LS100KIT or Italy Item# 180KIT100
These clips are good to use on tiles 1/8" to 1/2" thickness
How to set the support:
1) After having spread the adhesive, insert the clip (base / support) underneath the tiles and along 4 sides.
2) According with tiles size, set one or more clips on each side of the tiles.
3) Set the tile and beat it with a rubber mallet.
How to insert the wedge:
4) Insert the wedge into the clip (base) slot paying attention not to pass the breakpoint.
5) To facilitate this option, the use of a special tension-adjustable-pliers is recommended.
How to remove the support:
6) Once the adhesive is set, the protruding part of the clip (support), has to be removed by separating at the clip base.
7) This can be done with a rubber mallet or even with your foot, Beat parallel to the joint.
8) Broom the surface and save the wedges (wedges are reusable)
Tile This, LLC
ONLINE WEBSITE
Authorized Distributor
Raimondi
RLS KIT