LuxHeat Mat Kit 120v (10-150sqft) Electric Radiant Floor Heating System Tile and

Description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT
The luxury of a heated tile floor in the cold months is a pleasure that must be experienced to be truly appreciated.
LuxHeat mats can be cut, turned, flipped, or have wires removed to accommodate any room shape or size.
The LuxHeat mat coupled with OJ Microline's Intuitive Programmable Touchscreen thermostat makes for one of the most versatile and reliable heating systems.
BEST SUITED FOR:
★ Can be installed as primary or secondary heat source
★ Residential homes, Office apartments and Senior living facilities
★ Under Tile, Carpet , Stone, Marble, Laminate and Engineered wood floors
HEATING MAT FEATURES:
✔ 25 Year limited warranty
✔ Double insulated, single cold lead
✔ UL listed for USA, classified as safe for wet Locations
✔ 12watts/sqft @ 3" spacing provides optimal heat distribution
✔ Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire
✔ Heater wire is less than 1/8” thick, ensures minimal effect on finished floor height
✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped
THERMOSTAT FEATURES:
✔ 240 Volt
✔ c UL us Listed
✔ GFCI Class A 5mA
✔ Dual sensing (Air & Floor)
✔ Load: 15amp - 3600w @ 240v
✔ Large back-lit display with Intuitive menu
✔ Other Modes: Child lock, Manual override & more
✔ 7-Day Program, pre-set program can be customized to suit one’s lifestyle
Cable Monitor:
Includes batteries
BENEFITS:
✔ Recommended by Health Professionals for Allergy sufferers
✔ No unattractive heaters, storage hassles, maintenance, or smell
✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts
✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability
About Us
Prolux Materials LLC is a family owned, American business
, focused on delivering quality products throughout the USA.
With
production and distribution facilities in both Kentucky and Tennessee
, we find ourselves well positioned to meet all logistical demands.
Our Flagship Floor Heating brand,
LuxHeat
, coupled with
OJ Microline’s
range of intuitive, energy efficient thermostats, offers the ultimate in Luxury and Comfort, Reliability and Affordability.
Suitable for Most Floor Coverings
BATHROOM
IDEALLY SUITED FOR TILES
Includes porcelain, ceramic, marble and more. Safe for wet areas, including showers.
Important
:
Elements
MUST
be Embedded in Thinset, leveling or self-leveling compound.
BEDROOM
LAMINATE FLOORING
We recommend Installing a Floor sensor to limit floor temperature and protect flooring.
Important
:
Elements
Must
be Embedded in Thinset, leveling or self-leveling compound
KITCHEN
VINYL FLOORING (LVT)
We recommend Installing a Floor sensor to limit floor temperature and protect flooring.
Important
:
Elements
MUST
be Embedded in Thinset, leveling or self-leveling compound.
LIVING ROOM
HARDWOOD FLOORING
Includes Engineered and Solid wood. We recommend Installing a Floor sensor to limit floor temperature and protect flooring.
Important
:
Elements
MUST
be Embedded in Thinset, leveling or self-leveling compound.
Intelligent Heating Systems
If it wasn’t for the cozy warm feeling in the room, you would never know it had been fitted.
Unlike conventional heaters that warm one particular spot, LuxHeat radiant floor heating
evenly distributes warmth
throughout the floor and up into the room, leaving no uncomfortable cold spots.
The
heat is directed
where it is most pleasing –
the feet
– leaving the air we breathe slightly cooler. In fact, the air surrounding our bodies remains slightly cooler than our bodies, preventing that ‘’stuffy’’ feeling so often experienced in a room that is heated by forced air.
3” pre-spaced wiring is designed to reduce installation time and ensure even heat distribution.
Dual wire technology with aluminium shield minimizes electromagnetic fields (EMF).
The Mesh can be cut and flipped or rotated to provide maximum coverage; wires can also be removed from the mesh to help get into those hard-to-reach areas.
The Self-Adhesive mesh on one side and double sided tape on the other, ensures the mat adheres to sub-floor and lies flat even when flipped or rotated.
Radiant heat does not dry out the air, circulate dust or aggravate allergies.
Out of sight, no unattractive plug-in heaters, radiators or vents; no storage hassles and no fan noise.
No hot, exposed or moving parts and no maintenance.
Optimal Comfort, Easy Control and Contemporary design
The
modern thermostat
provides so much more than simple temperature control - it is a
personalized and intuitive
device designed to give a greater degree of control and comfort in the hands of the user.
The OJ Microline UDG-4999
Programmable Thermostat
​​​​​​​ with
built-in GFCI
is an “all-in-one” intelligent programmable thermostat for radiant floor heating, providing optimal comfort temperatures and energy savings. Designed and manufactured by OJ Electronics – Denmark.
Monitored energy consumption – monitors cost while ensuring comfort.
7 Day, 4-Event program - Pre-programmed for quick set-up.
Dual sensors (Air and Floor) with floor limiting feature.
Built-in Class A GFCI (Ground Fault Circuit Interrupter).
Intuitive menus – no manuals needed.
Large back - lit display for easy reading.
Child lock - prevents tampering
Mesh Cutting Techniques – Cut & Rotate
There are several ways the heating mat may be
cut and turned
to fit around corners and avoid obstacles such as fixtures and built-ins on the floor.
Heating wires must never touch or cross
Heating wire cannot be cut or shortened
Heating wires must never be closer than 2 ½ inches apart
The
mesh
between the wires may be cut but take great care
not to cut or nick the wire
itself. Wire may also be
removed from the mesh
and laid out on the floor. Secure in position with pieces of 1” wide duct tape, or hotmelt glue.
This Kit Includes
LuxHeat Floor Heating Mat
LuxHeat's Radiant Floor Heating Mat is one of the most
robust, versatile, easy to install
floor heating systems available on the market today. The resin coated
fibreglass re-enforcing mesh
is designed to protect the heating cable and add strength to the layer of thinset or mortar.
The re-enforcing mesh can be cut, turned, flipped, or in part removed, to accommodate any room size or shape. While the
MESH can be cut, the heater wire MUST NOT be cut or shortened.
Elements are ETFE insulated and covered by a tough outer jacket, providing the ultimate dialectic and mechanical strength.
Heater wire is less than 5/32" thick, ensuring minimal effect to finished floor height.
Heater wires are pre-spaced at 3” intervals – providing optimal heat distribution.
Mats are 20” wide, and available in various lengths.
Watt density: 12w/sqft.
Voltage: 120v.
UDG-4999 Programmable Thermostat
The UDG Thermostat can be configured for control of
Floor Temperature, Room Temperature, or Room Temperature with Floor Temperature Limiting
- providing optimal comfort levels while ensuring floor coverings do not exceed recommended temperatures.
The UDG offers all the necessary functions to ensure easy installation and temperature control, for
every floor type
. Accurate and intelligent control
reduces running costs and ensures personal comfort.
Ambient Temp Range +32 to +104°F (0 to +40°C).
Floor limit range: +41 to +104°F (+5 to +40°C).
Dimensions: H 4.8” x W 3” x D 1”.
Load: 15Amps (1800w@120v).
Built-in Class A GFCI.
Voltage: 120v.
LuxHeat Monitor
The LuxHeat Monitor is designed to measure the heating
cable’s continuity
during installation.
If the heating cable is
cut or damaged
during installation the Monitor will immediately alert the installer by means of a
loud alarm
and red flashing light. We still recommend an ohms test is carried out before, during and after installation.
If the alarm sounds we suggest contacting a professional to identify the damaged area and make the repair.
Early warning system, avoiding costly repairs in the future.
Connects directly to the heater - Live, Neutral and Earth.
Provides peace-of-mind during installation.
Offers real-time continuity monitoring.
Includes loud alarm and flashing light.
Works with all floor heating systems.
Includes 2xAAA batteries.
Floor Sensor
The Floor Sensor is a reliable and accurate
temperature sensing probe
designed to measure
floor
temperatures
when connected to a thermostat. OJ Thermostats’ default setting is Dual Sensing (Air/Floor), meaning the floor sensor will need to be installed and
connected
.
The thermostat can be set to measure AIR only, but for optimal control and comfort we
recommend installing the floor sensor
and using the thermostats default ‘Dual Sensor’ setting.
Installs directly between heating wires for accurate temperature readings
Used in conjunction with Thermostat to limit floor temperature
Resistance: 8 to 12 K OHM measures 68˚F to 86˚F (20˚C to 30˚C)
Neutral polarity making for simple connections
15ft length allows for optimal placement
Connects directly to thermostat
Sensor type: NTC 10 K OHM
Listing and template services provided by inkFrog