-40%
Kicker 46PKD4 4 AWG Dual Amplifier Power Kit

Kicker 46PKD4 4 AWG Dual Amplifier Power Kit

$ 131.97

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Item must be returned within: 60 Days
  • Type: Amp Wiring Kits
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: New
  • MPN: 46PKD4
  • Model: Kicker 46PKD4
  • Return shipping will be paid by: Seller
  • Brand: Kicker
  • California Prop 65 Warning: Warning: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • UPC: 713034088882

    Description

    Product highlights
    multi-amplifier power wiring kit
    cables meet or exceed the American Wire Gauge specifications and requirements
    17 feet of blue 4-gauge power cable with attached ring terminal and protective wire loom
    4 feet of gray 8-gauge ground cable with attached ring terminals
    4 feet of blue 8-gauge power cable
    17 feet of clear 16-gauge turn-on lead wire
    FHD fused distribution block with 60-amp and 40-amp fuses
    AFS fuse holder and 100-amp fuse
    assortment of installation hardware and cable ties
    extends a Kicker amplifier's warranty by one year, if purchased along with the amp
    warranty: 1 year
    What's in the box
    17' Length of 4-gauge blue power wire (ring terminal on one end)
    4' Length of 8-gauge blue power wire
    4' Length of 8-gauge gray ground wire (ring terminals on both ends)
    17' Length of 16-gauge silver remote wire
    FHS fuse holder with 200-amp AFS fuse installed
    FHD fuse holder with 60-amp and 40-amp AFS fuses installed
    4-Gauge firewall grommet
    Six 6" wire ties
    2 Self-tapping hex-head bolts
    2 Flat washers
    18-22 Gauge butt connector
    About this item
    Written by Crutchfield's Buck Pomerantz
    This wiring kit does not include speaker wire or patch cables. You will need to purchase those separately, in order to complete your amplifier installation.
    This kit delivers all the power your multi-amp system needs
    Your amplifiers need hefty power and ground wiring in order to deliver the big power you want. Kicker's PKD4 multi-amp wiring kit includes the basic power, ground, and turn-on wiring for an amplified system with a total fuse rating of up to 100 amperes. This kit is suitable for a system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps.
    The kit includes a 17-foot 4-gauge power wire that runs from your battery to the fused distribution block, plus a 4-foot length of 8-gauge wire that can be made to accommodate two amplifiers. Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference.